Upon completion of this course you will be able to route straight pipes or tubes, place parts, route flexible tubes, adjust the design of piping or tubing network. CATIA – Tubing Design 2 (TUB) creates and manages physical designs of tubing lines/systems using industry standard conventions, terminology, practices and. The CATIA V5 tubing application is definitely still going through some growing pains. I have had some exposure to piping design and seems to.
|Published (Last):||24 June 2017|
|PDF File Size:||2.95 Mb|
|ePub File Size:||5.69 Mb|
|Price:||Free* [*Free Regsitration Required]|
March 28, We’ve been using this methodology for a while with good results. This is a long term investment; it is very optimistic to try to achieve something significant in a short period of time, that generally does not work very well in engineering.
All of these methods are workarounds to get around the lack of functionality in this area. As the design evolves and more geometry becomes available you can then start to place your clamps on the ribs, covers, etc.
Working with TUBING DESIGN & ENOVIA LCA
The class was not long enough IMHO, however, implementation is easily done as long as your homework as far as attributes is done correctly. October 14, October 24, You will be prompted to select physical parts corresponding to diagram symbols Hope it will help you.
They have invited us for a test and I just wonder if someone else tried it and assed how good the correlation is. Their initial efforts have the common objective to simplify designers lives in the near future.
I have a question Looking forward to having alot of my questions answered Let’s say I have a clamp that I have made as a template part, I also have a design table as well.
If you can pass them the message, I would be grateful. I won’t be alone to deploy it, some “business” resources will participate. You can change this resource’s location to create new line IDs, but unless you are creating a customized project you will need to move your new line IDs to the original location and link them to your Line ID catalog before you can use them.
Just explain it to my boss and its shrunk budget! March 29, I didn’t hear anything concerning a future exploded mode support for tubing, piping, Check your PRM to see if the correct option is set: The only method we could use is to insert the 2 hose ends as individual parts, then route the flexible run between them.
I know that there program constraints and so on, but throw a few more men to the job. The only change I made compared to the default DS flexible is a section sketch modification, and type, to fit my customization.
Dassault probably has more such documents. As for Kinematics, we save those off to the file system with the parts still controlled by VPM. I will be curious as to what they have to say.
We are forced to catja the so-called “Work Package” methodology. Do you mean a real modeler for flexible tubing? This rule is also important when working in Schematic-driven mode 3D slaved to Tubing diagram. On the other hand, we are also using the V5 Electrical package, and although it has some “glitches” it works MUCH better and is far easier to set up than Tubing.
May 31, But still the customer wants to go on with production soon. See PRM documentation for more details. I do have one question. I would like to go to Woodland Hills too I’ve tried everything, and no way to make it work, even with correctly defined compatibilities.
This makes it quite a bit easier to edit the whole process.
COE : Forums : Working with TUBING DESIGN & ENOVIA LCA
When I run a report PslRun. I’ve got many many more like these. Our latests tests on R14 seem more promising and we are working on it. We have used parameters and tables to tell us cxtia length to make the flexible run in order to get the desired total length hose including the 2 end fittings.
It works really well, even if I turn around DS recommended methodology.
Tubing Schematic to Design – TUE
By setting up this rule, you enable listing of your parts during part placement: I have had some exposure to piping design and seems to me that the CATIA V5 tubing application was probably developed by someone with more experience in piping design than tubing design. Apparently there is a commitee to address common industry concerns, but unfortunately they did not attend the conference. After that, I begin detail tubing design fittings, tubes, etc.
You may find I’m too exigent. Have fun and let’s make this discussion thread live! It is harder to set up as the “eguipment” workbench has ‘two’ desiyn of functional-physical mapping tables, one for general global and one just for tubing.
One thing they mentioned is that when using catalogs, dessign a master that references the others, can be a bit complicated, but PDM systems get bogged down memorythis will help. Tubing Diagrams uses the functional classification Tube function, etc. Tubing design came a long way and is now a fairly mature workbench which delivers significant advantages to the business, that is our humble opinion.
Many of its features and limitations seem to make more sense if you look at them from a piping standpoint.